DC高斯計 Gaussmeter

DC高斯計 Gaussmeter
型號AL1-HS

hs

在高斯計讀中等強度靜磁場高達800G與.01G的分辨率。測量黑色金屬，電磁鐵和遠場強磁鐵的磁化。

產品特點：

高動態範圍和靈敏度：讀取高達799.99高斯與高斯0.01分辨率包括極性。
無需安裝或初始校準。
自動調零（減去隨後的讀數。
1％的精度在室溫下。
柔性探頭和電池都包括在內。
CE標準。

應用範圍：

金屬零件剩磁詳細的測量。
使用映射字段附近的磁鐵，如圍繞MRI機器高斯線。
檢測周圍磁場的方向和強度，如地球場。

規格：1軸DC高斯計GM1-HS
量程/分辨率： 799.99 G / 0.01 G組; 極性指標
精度： 閱讀（16°至29°C）+/- 1％; +/- 2％（-4°至65℃）
偏移： 自動調零。（0.01高斯分辨率）
探針（不可拆卸的）： 2.3（厚）×100 =厘米電纜4.8×24毫米
尺寸： 5.2×3.6×1.6英寸; 132 X 91 X41毫米
重量： 8盎司
電池： 9伏鹼性（約20小時壽命）/“電池電量低”指示燈

AL1-HS DC Gauss meter

hs

The Gaussmeter Model AL1-HS reads moderate-strength static magnetic fields up to 800 G with a resolution of .01G. It measures magnetization of ferrous metals,
solenoids and the far field of strong magnets.

Product Description:

The Model AL1-HS measures the strength and polarity of magnetic fields up to 799.99 gauss. The thin sensor is at the end of a 100 cm flexible cable.
The sensor tip is also flexible and can be bent for a variety of situations. The sensor can be held against the surface of a steel part to check for residual magnetism,
or it can be bent into an “L” shape to measure inside a DC Solenoid. This meter has a resolution of .01 gauss (1/50 of the Earth’s typical field)
which is finer resolution than the Model AL1-ST. It is also used to map fields from large magnets (If fields are over 800 gauss, use the Model AL1-ST).
The meter has immediate turn-on and updates 4 times a second. There is no setup required, making this the fastest gaussmeter available.

Features:

High dynamic range and sensitivity: reads up to 799.99 gauss with .01 gauss resolution including polarity.
Instant on, updates four times a second, with no setup or initial calibration required.
An offset control allows +/- 4 gauss adjustment if required (set knob to center if offset is not needed).
1% accuracy at room temperature.
Flexible probe and battery are included.
CE Compliant.

Applications:

Makes detailed measurement of residual magnetism in metal parts.
Use to map field near a magnet, such as the 5 gauss line around an MRI machine.
Detect ambient field direction and strength, such as Earth Field.

SPECIFICATIONS:

Range/Resolution: 799.99 G/0.01 G; with polarity indicator
Accuracy: +/- 1% of reading (16° to 29°C); +/- 2% (-4° to 65°C)
Offset: Potentiometer controlled +/- 4 G
Probe (non-detachable): 2.1 (thick) x 4.3 x 24 mm
Size: 5.2 x 3.6 x 1.6 inches; 132 x 91 x 41 mm
Weight: 8 oz
Battery: 9 volt alkaline (~ 20 hour life)/ “Low Battery" indicator

*including factory calibration certificate

 

 

型號AL1-ST

st

在高斯計型號AL1-ST測量即使是最強大的磁鐵（20KG）
到精細分辨率（0.1G）的領域。 擁有快速啟動和快速更新

產品特點

高動態範圍5½位數字顯示屏顯示即使是最強大的磁鐵與0.1高斯的分辨率，包括極性。
無需安裝或初始校準。
自動調零。
滿高斯19,999.99。
1％的精度在室溫下，包括探針。
探頭和電池包括在內。
CE標準。

應用

所有的永磁體。 （磁鐵的最大場是約15,000，稀土類磁鐵。）
+19,999.9為-19,999.9高斯的整個範圍, 高分辨率0.1高斯, 允許檢測場從磁鐵的任何變化。

規格：1軸DC高斯計
量程/分辨率： 19,999.9 G / 0.1 G組; 極性指標
精度： （16°至29°C）+/- 1％; +/- 2％（-4°至65℃）
偏移： 自動調零。 （0.1高斯分辨率）
探針（不可拆卸的）： 1.5（厚）×4.3×24毫米
儀表尺寸： 5.2×3.6×1.6英寸; 132 X 91 X41毫米
重量： 8盎司
電池： 9伏鹼性（〜40小時壽命）/“電池電量低”指示燈

AL1-ST DC Gaussmeter

st

The Gaussmeter measures the field of even the strongest magnet (to 20kG) down to fine resolution (0.1G). Features rapid turn-on and fast update.

Product Description:
The Model AL1-ST measures strength and polarity of magnetic fields up to 19,999.9 gauss. The sensor can easily fit in a .060 inch (1.5 mm) gap and is at the end of a 100 cm flexible cable. The sensor end can be bent if required for a variety of situations. Place the sensor on a magnet face to measure the field. With a resolution of 0.1 gauss, it can measure any tiny variation from magnet to magnet or it can detect if a given magnet has lost even a little strength. Bend the sensor in to a “L” to measure inside a DC solenoid tube. The 5 ½ digit display requires neither auto nor manual range change, making it easier to use than older style 3 ½ or 4 ½ digit meters. Turn on the meter and immediately begin reading fields (updates 4 times per second). There is no setup required, making this the fastest, easiest gaussmeter available.

Features
High dynamic range 5 ½ digit display reads even the strongest magnets with .1 gauss resolution, including polarity.
Turns on instantly, updates four times a second, no setup or initial calibration required.
Auto-Zero (subtracts the present field from subsequent readings); also a fine offset control.
Offset range is the full +/- 19,999.99 gauss.
1% accuracy at room temperature, including probe.
Probe and battery included.
CE Compliant.
Applications
Measures all permanent magnets. (Maximum field of magnets is about 15,000, which occurs only with rare-earth magnets in a gap configuration.)

High resolution of 0.1 gauss over the entire range of +19,999.9 to -19,999.9 gauss allows detection of any variation in field from a magnet.

Measures inside DC Solenoids (probe is bent into “L” shape to measure this).

Sufficient resolution to map fields far from magnets.

SPECIFICATIONS:

1-axis DC Gaussmeter
Range/Resolution: 19,999.9 G/0.1 G; with polarity indicator
Accuracy: +/- 1% of reading (16° to 29°C); +/- 2% (-4° to 65°C)
Offset: Auto-Zero. Also fine offset (0.1 gauss resolution)
Probe (non-detachable): 1.5 (thick) x 4.3 x 24 mm
Meter Size: 5.2 x 3.6 x 1.6 inches; 132 x 91 x 41 mm
Weight: 8 oz
Battery: 9 volt alkaline (~ 40 hour life) / “Low Battery" indicator

 

 

 

聯絡我們 Contact us:

香港 Hong Kong： Tel. 852 2691 3821 Fax. 852 2900 2980
中國 China： Tel. 86 150 17992655
電郵 Email： labsupplyhk@gmail.com
網址 Web： http://www.etc.hk

留言表格 Inquiry Form: