RevSpin Microcentrifuge Model RS-150
The RevSpin RS-150 is stronger, faster, and has more than twice the capacity of competing palm-sized microcentrifuges. The RS-150 is a compact, countertop centrifuge with a simple 2 button operation: Off/Pulse/6,000 RPM/10,000 RPM. The RS-150 includes our high capacity 1.5/2.0 ml 16-position rotor and our reasonably priced four 8 x 0.2ml strip rotor is also available. Over-sized soft rubber base absorbs vibration and stops bench walking. Rapid slow down, from 10,000 RPM to zero in approx. 20 seconds.
Product Specifications
Model No.: RS-150
Power requirements: 100 – 230VAC 50-60 HZ 1.5 amps, detachable grounded cord
Net weight: 6 lb. (shipping weight 7 lb.)°, unique vertical loading
Dimensions: 9 inches tall x 7 inches diameter
Motor: Ball bearing, high efficiency, permanent magnet DC
Speed selections: Off/Pulse/6,000/10,000
RPM: Low-6,000 High-10,000
RCF: Low-1735/2245, High-4819/6238
Rotor capacity: 16 tubes, 1.5 or 2.0 ml (holes numbered 1-16)
Product Features
Affordability: The RS-150 is stronger, faster, and has more than twice the capacity of competing palm-sized° position. Lid-locking mechanism does not allow lid to open until rotor stops. microcentrifuges and inexpensive enough for any lab or individual.
Simplicity: 2 button operation: Off/Pulse/6,000 RPM/10,000 RPM with easy to read graphics indicating RPM and RCF. Easy-load rotor permits tubes to be loaded vertically, but spin in 45
Reliability: Over-sized soft rubber base efficiently absorbs vibration, reduces noise and vibration transmitted to bench, stops bench walking, resists tipping, and absorbs impact from careless handling.
Capacity: 16 position rotor receives 1.5 or 2.0 ml tubes, each hole is clearly marked by numbers.
Durability: Over-sized 8mm shaft will not bend from abuse or imbalance. Forced air ventilation assures specimens, rotor and motor stay cool, even during extended runs.
Safety: Detachable grounded cord, double insulated construction.
Precision manufacturing: Made in USA of American and Imported parts.
RevSpin Microcentrifuge Model RS-200
RevSpin Microcentrifuge – multi-speed, timer
Product Features
– The digitally controlled multi-speed microcentrifuge, includes a pulse feature for short spins
– High capacity 16 position rotor receives 1.5 or 2.0 ml tubes, each hole is clearly marked by numbers
– Easyload rotor permits tubes to be loaded vertically, but spin in 45° position
– Oversized soft rubber base efficiently absorbs vibration, reduces noise and vibration transmitted to bench, stops bench walking, resists tipping, and absorbs impact from careless handling
– Oversized 8mm shaft will not bend from abuse or imbalance
– Forced air ventilation assures specimens, rotor and motor stay cool, even during extended runs
– Safety switch instantly stops rotor if lid is slightly ajar, will not operate without cover in place
– Digital display
– Imbalance detection system
– Programmable timer
– Multiple speed selection up to 10,000 RPM
– Precision manufacturing: Made in the USA!
Product Specifications
– Power requirements: 100 – 230VAC 50-60 HZ 1.5 amps, grounded cord
– Motor: Ball bearing, high efficiency, permanent magnet DC
– Timer: 60 minute digital timer
– RPM: Max-10,000 (2000,4000,6000,8000,1000 RPM)
– RCF: Max-6,238 (192,249,770,998,1735,2245,3083,3992,4819,6238 RCF)
– Rotor capacity: 16 tubes, 1.5 or 2.0 ml (holes numbered 1-16), optional 0.2ml strip rotor
– Rotor type: 45°fixed angle, unique vertical loading
Dimensions:
– 9 inches tall x 7 inches diameter
– Net weight: 5 lb. (shipping weight 7 lb.)
RevSpin PCR rotor
RevSpin PCR strip rotor (0.2ml) replacement for RS-150, RS-200.
聯絡我們 Contact us:
香港 Hong Kong: Tel. 852 2691 3821 Fax. 852 2900 2980
中國 China: Tel. 86 150 17992655
電郵 Email: labsupplyhk@gmail.com
網址 Web: http://www.etc.hk
留言表格 Inquiry Form: