2600 塗層測厚儀

產品特色：
多種探頭可選，實現特殊測量需求
自動統計量：平均值（MEAN）、最大值（MAX）、最小值（MIN）、測試次數（NO.）、
儀器校准釆用兩種方法，精度更高
一體化打印機

產品原理：
磁性塗層測厚儀：測量永久磁鐵（側頭）和基體金屬之間由於存在覆蓋層而引起磁引力的變化；或者是測量通過覆蓋層與基體金屬磁路磁阻的變化。可以無損傷地測量磁性金屬基本體上非磁性覆蓋層的厚度（如鋼、鐵、合金和硬磁性鋼上的鋅、鋁、鉻、銅、橡膠、油漆等）
渦流塗層測厚儀：利用側頭裝置所產生的高頻磁場，使置於側頭下面的導體產生渦流，其振幅和相位是導體與側頭之間的非導電覆蓋層厚度的函數。可無損測量非磁性金屬基體上非導電覆蓋層的厚度（如銅、鋁、鋅、錫等金屬上的油漆、橡膠、塑料、氧化膜等）

 

2600 Coating Thickness Gauge

 

 

Standards(DIN, ISO, ASTM,BS)
Calibration(Zero and foil calibration
Data memory(640 readings)
Leave a message

Product Introduction
2600 Coating Thickness Gauge can nondestructively measure the thickness of non-magnetic coatings (such as zinc, aluminum chrome, copper, rubber, paint and so on) on ferrous metals (such as steel, iron, alloyed metals, hard magnetic steel and so on). It can also measure the thickness of non-conducting coatings (such as rubber, paint, plastic, anode oxide film and so on) on the non-ferrous materials (such as copper, aluminum, zinc, tin and so on). It can fast, exactly and non destructively measure the thickness of coating and plating.

Features
Two measuring methods: magnetic induction (F) and eddy current (N). When F probe is equipped, it can measure the non-magnetic coating in magnetism substrate, when N probe is equipped, it measure the non-conductive coating on non-magnetism substrate Click here for details
6 types of probes are available for various applications: F400,F1,F1/90,F10,N1,CN02
2 measurement modes: continuous / single
5 statistical ways: Mean values / Max. values / Min. values / testing numbers.(No.) / standard deviations (S.DeV)
640 measured values can be stored
Integrated with printer for convenient use
Low battery indication
2 switch off modes: manual and auto

Technical Specification
Measuring range Refer to the table below
Probes available
Tolerance
Minimum resolution:
Measuring condition
Operation language English
Standards DIN, ISO, ASTM,BS
Calibration Zero and foil calibration
Statistics Number of measurements, mean, standard deviation,maximum and minimum of 3000 readings
Data memory 640 readings
Limits Adjustable with alarm
Interface RS-232
Working temperature 0-40℃
power supply NiMHrechargeable batteries 1.25V
Dimensions 230mm×86mm×47mm
Weight Approx. 530g

Standard Delivery
Main unit
Calibration foil set
Substrate
Charger
Probe F1 or N1
Instruction manual
Certificate

 

---

聯絡我們 Contact us:

香港 Hong Kong： Tel. 852 2691 3821 Fax. 852 2900 2980
中國 China： Tel. 86 150 17992655
電郵 Email： labsupplyhk@gmail.com
網址 Web： http://www.etc.hk

留言表格 Inquiry Form: